Abstract
Careful measurements have been made of the wear of rubbing steel surfaces as a function of load, distance of travel, and hardness under controlled conditions which eliminated the effect of all factors except adhesion. At normal pressures averaged over the apparent contact area which are less than one third the hardness of the softer material the amount of wear was found to depend linearly on the distance of travel and on the load but was independent of the apparent area of contact. At average pressures greater than one third of the hardness, the depth of wear varied linearly with the distance of travel, was independent of the apparent area of contact for a given average normal stress, but increased many fold for small increases in stress. These findings rationalize the familiar observations on the running-in of machine surfaces. The results are discussed in the light of the current adhesion theory of dry friction.
Keywords
Affiliated Institutions
Related Publications
Contact and Rubbing of Flat Surfaces
The interpretation of certain phenomena occuring at nominally flat surfaces in stationary or sliding contact is dependent on the assumed distribution of the real area of contact...
Frictional Characteristics of Atomically Thin Sheets
Thin Friction The rubbing motion between two surfaces is always hindered by friction, which is caused by continuous contacting and attraction between the surfaces. These interac...
Metallic transfer between sliding metals: an autoradiographic study
This paper describes a study of the friction and metallic transfer between sliding metal surfaces in the absence and in the presence of boundary lubricant films. One surface is ...
The Nature of the Static and Kinetic Coefficients of Friction
Experiments have been carried out to determine the transition between static and kinetic conditions when stationary metal surfaces are set into motion, a simple method being use...
Contact Mechanics
This treatise is concerned with the stresses and deformation of solid bodies in contact with each other, along curved surfaces which touch initially at a point or along a line. ...
Publication Info
- Year
- 1952
- Type
- article
- Volume
- 23
- Issue
- 1
- Pages
- 18-28
- Citations
- 295
- Access
- Closed
External Links
Social Impact
Social media, news, blog, policy document mentions
Citation Metrics
Cite This
Identifiers
- DOI
- 10.1063/1.1701970