Abstract
Abstract Layered LiCo1/3Ni1/3Mn1/3O2 was prepared by a solid state reaction at 1000 °C in air and examined in nonaqueous lithium cells. LiCo1/3Ni1/3Mn1/3O2 showed a rechargeable capacity of 150 mAh g−1 in 3.5–4.2 V or 200 mAh g−1 in 3.5–5.0 V. Operating voltage of Li / LiCo1/3Ni1/3Mn1/3O2 was by 0.2–0.25 V lower than that of a cell with LiCoO2 or LiMn2O4 and by 0.15–0.3 V higher than that with LiNiO2 or LiCo1/2Ni1/2O2 due to a complex solid solution mechanism.
Keywords
ChemistryLithium (medication)IonSolid-stateInorganic chemistryNuclear chemistryMineralogyPhysical chemistryOrganic chemistry
Affiliated Institutions
Related Publications
Layered Cathode Materials Li[Ni[sub x]Li[sub (1/3−2x/3)]Mn[sub (2/3−x/3)]]O[sub 2] for Lithium-Ion Batteries
The structure, synthesis, and electrochemical behavior of layered for 5/12, and 1/2 are reported for the first time. is derived from or by substitution of and by while maintaini...
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
A strategy used to design high capacity (> 200 mAh g-1), Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries is discussed. The advantages of the Li...
All-Solid-State Lithium Battery with LiCo[sub 0.3]Ni[sub 0.7]O[sub 2] Fine Powder as Cathode Materials with an Amorphous Sulfide Electrolyte
An all-solid-state battery was fabricated with fine powder as cathode materials. The fine powder was synthesized with oxalate decomposition methods and the average particle size...
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Reversible extraction of lithium from (triphylite) and insertion of lithium into at 3.5 V vs. lithium at 0.05 mA/cm2 shows this material to be an excellent candidate for the cat...
Novel LiCoO<sub>2</sub> Cathode Material with Al<sub>2</sub>O<sub>3</sub> Coating for a Li Ion Cell
A high-performance LiCoO2 cathode was successively fabricated by a sol-gel coating of Al2O3 to the LiCoO2 particle surfaces and subsequent heat treatment at 600 degreesC for 3 h...
Publication Info
- Year
- 2001
- Type
- article
- Volume
- 30
- Issue
- 7
- Pages
- 642-643
- Citations
- 1314
- Access
- Closed
External Links
Social Impact
Altmetric
PlumX Metrics
Social media, news, blog, policy document mentions
Citation Metrics
1314
OpenAlex
Cite This
Tsutomu Ohzuku,
Yoshinari Makimura
(2001).
Layered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries.
Chemistry Letters
, 30
(7)
, 642-643.
https://doi.org/10.1246/cl.2001.642
Identifiers
- DOI
- 10.1246/cl.2001.642